Flow activated with three modes of operation the Econ FP is perfect for light-duty applications such as drinking water
disinfection or pH adjustment for private water wells in homes or farms. In the animal health market such as poultry hatcheries,
the FP can inject nutrients or supplements into the drinking water or disinfect the water lines with the injection of acids,
chlorine or chlorine dioxide. How it works - the Econ FP is flow activated from a water meter, control valve, flow switch or from
any control equipment that responds to flow. The pump accepts a dry contact or a 12 to 24 VAC/VDC signal and runs at a set time or
a set speed according to the mode of operation selected. The control panel displays one of three operating modes, Seconds, Flow
Switch and Auxiliary and the percent setting for each. The functions are easy to program on the six button control pad with a
backlit LCD window. To assist against tampering, two buttons are required for operation and the keypad will automatically lock if
it remains idle for one minute. The pump features an enclosed housing, is wall mountable and carries cULus for indoor and outdoor
use. Mounting the pump vertically is required for wet environments or outdoor use and optional mounting accessories are also
available. Seconds dry contact. In the seconds mode, the pump can receive a dry (non-voltage) contact signal and will run for a set
time in response to receiving the signal. The pump can receive the signal from, for example, a water meter or control valve that
sends a dry contact signal. There is a choice of five pump operating time ranges and the maximum time is displayed in the control
panel; the run time is adjustable from 10 to 100% in 1% increments. Activated by dry contact signal. Operates at a set time or
speed. 10:1 turndown, 1% increments. Tube replacement without tools. Solution is not in contact with moving parts. Pump head
requires no valves, allows for easy maintenance. Pump does not lose prime or vapor lock. Pumps off gassing solutions and can run
dry. Output volume is not affected by back pressure. Pump is field programmable to accept a dry contact signal or a 12 to 24
VAC/VDC input signal from any control equipment that responds to flow. Easy to change pump tube, lubrication is not required.
Indoor/outdoor use. CE Marked, cULus Listed, FDA Approved, NSF Certified.
disinfection or pH adjustment for private water wells in homes or farms. In the animal health market such as poultry hatcheries,
the FP can inject nutrients or supplements into the drinking water or disinfect the water lines with the injection of acids,
chlorine or chlorine dioxide. How it works - the Econ FP is flow activated from a water meter, control valve, flow switch or from
any control equipment that responds to flow. The pump accepts a dry contact or a 12 to 24 VAC/VDC signal and runs at a set time or
a set speed according to the mode of operation selected. The control panel displays one of three operating modes, Seconds, Flow
Switch and Auxiliary and the percent setting for each. The functions are easy to program on the six button control pad with a
backlit LCD window. To assist against tampering, two buttons are required for operation and the keypad will automatically lock if
it remains idle for one minute. The pump features an enclosed housing, is wall mountable and carries cULus for indoor and outdoor
use. Mounting the pump vertically is required for wet environments or outdoor use and optional mounting accessories are also
available. Seconds dry contact. In the seconds mode, the pump can receive a dry (non-voltage) contact signal and will run for a set
time in response to receiving the signal. The pump can receive the signal from, for example, a water meter or control valve that
sends a dry contact signal. There is a choice of five pump operating time ranges and the maximum time is displayed in the control
panel; the run time is adjustable from 10 to 100% in 1% increments. Activated by dry contact signal. Operates at a set time or
speed. 10:1 turndown, 1% increments. Tube replacement without tools. Solution is not in contact with moving parts. Pump head
requires no valves, allows for easy maintenance. Pump does not lose prime or vapor lock. Pumps off gassing solutions and can run
dry. Output volume is not affected by back pressure. Pump is field programmable to accept a dry contact signal or a 12 to 24
VAC/VDC input signal from any control equipment that responds to flow. Easy to change pump tube, lubrication is not required.
Indoor/outdoor use. CE Marked, cULus Listed, FDA Approved, NSF Certified.